Whether providing specialist or trainer level certification, Nancy Kristiansen ensures participants' success with lively presentations that focus on important concepts through the use of demonstrations, unique explanations, exhibits and exercises. Though participants are often nervous about taking tests and the technical nature of the material, Nancy's teaching style will put them at ease right from the start.
|
|
|
We can provide high quality training and certification
at both Certified IPC Specialist (CIS) and Certified IPC Trainer (CIT)
levels to the following standards. Training program details for each
of the three standards are outlined below for Certified IPC Specialist courses. Contact Nancy for more information.
www.ipc.org
Nancy Kristiansen
email: nancyk@leadershipforlearning.com
phone: 978-895-8299
|
|
|
Through a partnership with Blackfox Training Institute,
we are able to provide Certified IPC Trainer level certification in
each of the 3 areas of certification. Training can be conducted at
your site, according to your scheduling needs. Please contact Sharon
Montana-Beard for more information.
www.blackfox.com
Sharon Montana-Beard
email: sharonm@blackfox.com
phone: 303-684-0135 ext. 208
toll free: 888-837-9959
|
IPC-A-610D-Acceptability of Electronic Assemblies
The education and training goal of this program is to improve individual discrimination skills; that is, to improve accuracy of discrimination between acceptable/unacceptable electronic assembly per the IPC A 610 series. This program will also teach individuals the reasons for the accept/reject criteria to enhance their motivation and ability to consistently and correctly apply the discrimination criteria. Students will be able to make correct accept/reject decisions for the appropriate class/classes of production based on the acceptability requirements of IPC A 610.
COURSE STRUCTURE:
Module 1 (required)
Introduction/IPC Professional Policies and Procedures
Module 2 (required)
Foreward, Applicable Documents, & Handling
Module 3 (optional)
Hardware Installation
Module 4 (optional)
Soldering (Including High Voltage)
Module 5 (optional)
Terminal Connections (Requires Modules 4 & 8 prior to taking this module)
Module 6 (optional)
Through Hole Technology (Including TH Jumper Wires) (Requires Modules 4 & 8 prior to taking this module)
Module 7 (optional)
Surface Mount Assemblies (Including SMT Jumper Wires) (Requires Modules 4 & 8 prior to taking this module)
Module 8 (optional)
Component Damage and Printed Circuit Boards and Assemblies
Module 9 (optional)
Solderless Wire Wrap
CERTIFICATION REQUIREMENTS:
Successfully pass Modules 1 & 2 with an average score of 70% or better
Successfully pass Modules 3 thru 9 with an average score of 70% or better
WHAT THE "LEARNER" RECEIVES:
IPC A 610 Manual
IPC Application Specialist (CIS) Certificate
NOTES
Prerequisite: None
Certification Class Length: 4 days
ReCertification Class Length: 2-3 days
Certification Length: 24 months
|
ANSI/J-STD-001D-Requirements for Soldered Electrical and Electronic Assemblies
The purpose of this course is to assist the electronic manufacturer in the production of high quality products at the lowest possible cost by providing a greater understanding of the soldering and assembly processes through standard training. This course assumes that the students know some of the basic concepts and materials associated with hand soldering. If students have not previously preformed soldering activities then additional training will be necessary prior to attending this course.
COURSE STRUCTURE:
Module 1 (Mandatory) 1 day
Overview of J-STD-001 requirements and general requirements.
Module 2 (optional) 1 day
Study of the J-STD requirements applicable to the assembly and soldering of Wires and Terminals and practical exercises for development and demonstration of soldering skills.
Module 3 (optional) 1 day
Study of the J-STD requirements applicable to the assembly and soldering of Through Hole connections and practical exercises for development and demonstration of soldering skills.
Module 4 (optional) 1 day
Study of the J-STD requirements applicable to the assembly and soldering of Surface Mount components and practical exercises for development and demonstration of soldering skills.
Module 5 (optional) 1 day
Study of the theory and application of Inspection Techniques required by the J-STD and a practical exercise to develop and demonstrate inspection skills.
CERTIFICATION REQUIREMENTS:
Successfully pass Module 1 with a score of 70% or better
Successfully pass Modules 3 thru 6 with a score of 70% or better
WHAT THE "LEARNER" RECEIVES:
ANSI J STD 001 Manual
Applicable soldering kit(s)
IPC Application Specialist (CIS) Certificate
NOTES:
Prerequisite: Soldering skills
Certification Class Length: 5 days
ReCertification Class Length: 3 days
Certification Length: 24 months
|
IPC/WHMA-A-620-Acceptability of Electronic Assemblies
Learners will participate in a discussion and overview of the IPC A 620A. When there are revisions and/or amendments to this standard, learners will discuss applicable changes. Students will be able to make correct accept/reject decisions for the appropriate class/classes of production, based on the acceptability requirements of IPC/WHMA A 620.
COURSE STRUCTURE:
Module 1 (required)
Introduction/IPC Professional Policies and Procedures; Foreword; Cable/Wire preparation; Measuring Cables; Testing Cable assemblies
Module 2 (optional)
Crimp Terminations; Insulation Displacement Connections
Module 3 (optional)
Soldered terminations
Module 4 (optional)
Connectorization; Molding/Potting
Module 5 (optional)
Wire Splicing
Module 6 (optional)
Marking and labeling; Wire Bundling; Shielding; Cable/Wire Harness Protective Coverings
Module 7 (optional)
Coaxial and Twinaxial Cable Assemblies
Module 8 (optional)
Solderless Wrap
CERTIFICATION REQUIREMENTS:
Successfully pass Module 1 with a score of 70% or better
Successfully pass Modules 2-9 with an average score of 70% or better
WHAT THE "LEARNER" RECEIVES:
IPC A 620A Manual
IPC Application Specialist (CIS) Certificate
NOTES:
Prerequisite: None
Certification Class Length: 3-4 days
ReCertification Class Length: 2-3 days
Certification Length: 24 months
|
|
